BXQCH - PARABOND M-233

  • MSDS: BXQCH
  • Manufacturer: PARA CHEM SOUTHERN INC
  • Product Name: PARABOND M-233
  • National Stock Number: 8040-00N048582
Product Identification

Product ID:PARABOND M-233
MSDS Date:02/08/1991
FSC:8040
NIIN:00N048582
MSDS Number: BXQCH

Responsible Party
PARA-CHEM SOUTHERN INC
SIMPSONVILLE, SC 29681
US

Emergency Phone: 803-967-7691

Info Phone: 803-967-7691

Cage: 15865

Contractor
PARA-CHEM SOUTHERN INC
127 SIMPSONVILLE, SC 29681 US

Telephone: (803) 967-7691

Cage: 15865

Ingredients

LIGROINE; (VM&P NAPHTHA)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 3.4%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


METHANOL; (METHYL ALCOHOL) (SARA 313) (CERCLA)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 3.0%

OSHA PEL S, 200 PPM

ACGIH TLV: S,200 PPM/250 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


126 PER LITER OF COATING. 71 PER

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:IRRITATE. INHALATION:MAY
CAUSE IRRITATION TO THROAT, HEADACHE, NAUSEA, VOMITING, AND
DIZZINESS. INGESTION:NOT LIKELY TO OCCUR. IF SWALLOWED, NO SIDE
EFFECTS KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH W/WATER FOR @ LEAST 15 MINS. CALL PHYS IF IRRIT
OCCURS. SKIN:WASH W/SOAP & WATER. INHAL:MOVE PERSON TO FRESH AIR.
IF BRTHG PROBLEMS PERSIST, CONT PHYS IMMED. INGEST:TO CONSCIOUS
PERSON, GIV E 2 GLASSES OF WATER. INDUCE VOMIT & CALL PHYS IMMED.

Fire Fighting

Extinguishing Media:WATER FOG, CO*2, DRY CHEMICAL, AND CHEMICAL FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:DISPERSE SAND, SAWDUST, OR VERMICULITE.
COLLECT AND PLACE IN WASTE CONTAINER. WASH AREA THOROUGHLY WITH
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:RINSE ABOVE 40F. STORE IN WELL VENT
AREA. NEVER USE PRESS TO EMPTY. DRUM IS NOT PRESS VESSEL. DO NOT
TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:KEEP CLOSURE TIGHT & CNTNR UPRIGHT TO PVNT LEAKAGE.
THIS PROD AS SUPPIED IS LIQ, & THERE ARE NO DUST NUISANCE FROM
POWDER IN IT. WHEN PROD IS PROCESSED, POWDERS SHOULD BE
ENCAPSULATED. USER MUST DETER M IF THERE IS DUST HAZ BECAUSE
(SUPDAT)

Exposure Controls

Respiratory Protection:NOT NORMALLY REQD EXCEPT IF FRIED FILM IS
BURNING. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:USE SUFFICIENT VENT, IN VOL & PATTERN, BY OPENING WINDOWS &
DOORS, TO KEEP AIR CONTAMINANT CONC BELOW PEL/TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:USE GOOD HYGIENIC PRACTICES. (WASH HANDS BEFORE
EATING, USING WASHROOM, OR SMOKING.)
Supplemental Safety and Health
VP:SAME AS WATER. VAP DENS:SAME AS WATER. % VOLAT:45.5 (WT). OTHER
PRECAUT:OF PROCESS USED/END USE OF DRIED MATL. METHANOL CANNOT BE
MADE NON-POISONOUS. RPTS HAVE ASSOC RPTD & PRLNGD OVEREXP TO SOLV W
/PERM BRAIN & NERV SYS DMG. INTENTIONALMISUSE BY DELIB CONC & INHAL
CONTENTS MAY BE HARMFUL/FATAL.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SUPDAT
Vapor Density:SUPDAT
Spec Gravity:1.1 (WATER =1)
Evaporation Rate & Reference:1 (WATER =1)
Solubility in Water:DILUTABLE
Appearance and Odor:LIGHT STRAW COLORED PASTE.
Percent Volatiles by Volume:SUPDAT

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DRIED MATL MAY PRODUCE CO, CO*2, H*2O,
NO*X, AND OTHER PROD FROM BURNING OF AROMATIC HYDROCARBONS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.